DILUTED LIQUID BITUMEN SALAMBO® - МС 70 and МС 250
T his technical specification refers to physical-chemical and performance of diluted liquid bitumen for road construction used as a first bitumen layer in the construction and maintenance of asphalt pavements. Produced on the basis of appropriately selected types of viscous road bitumen and diluents, a fraction of the distillation of petroleum, whether fractional composition. Depending on the diluent produces fluxed bitumens of different level of evaporation / drying /.Diluted Bitumen meet the requirements of ASTM D 2027 and AASHTO M 82.
Two component elastic hydro modified with SBS. Durable waterproofing of joints, horizontal and vertical parts buildings.
I. Technical Requirements and Test Methods 1.1. Diluted bitumen must meet the requirements specified in Table 1.
ІІ. RULES FOR ACCEPTANCE AND METHOD OF SAMPLING
2.1. Adoption of diluted bitumen for road construction is carried out in batches, according to item. 2.1. BDS 11035-81.
2.2. Sampling is carried out according to Standard of CEMA 1248-78.
ІІІ. PACKING, MARKING, STORAGE AND TRANSPORT
Packaging, marking, storage and transportation of diluted bitumen is made according to BDS 11035-81.
2.1. Adoption of diluted bitumen for road construction is carried out in batches, according to item. 2.1. BDS 11035-81.
2.2. Sampling is carried out according to Standard of CEMA 1248-78.
ІІІ. PACKING, MARKING, STORAGE AND TRANSPORT
Packaging, marking, storage and transportation of diluted bitumen is made according to BDS 11035-81.
|
INDICATORS |
REQUIREMENTS |
Test methods |
|
|
SALAMBO МС 70 |
SALAMBO МС 250 |
||
|
1. Kinematic viscosity at 60ºС, mm ² /s |
70-140 |
250-500 |
БДС EN ISO 3104 |
|
2. Flash point in open crucible, ºС, no less than |
38 |
66 |
Ст на СИВ 5469-86 |
|
3. Water Content, vol. %, Not more than |
0,2 |
0,2 |
BDS ISO3733 |
|
4. Percentage of total distillate distillate 360 ºC to: -up to 225 ºC, volume% -up to 260º C, volume% -up to 315º C, volume% |
0-20 20-60 65-90 |
0-10 15-55 60-87 |
ASTMD402-76 ASHTO T 78 |
|
5. Residue after distillation 360º C, vol%, not less than |
55 |
67 |
ASTMD402-76 ASHTO T 78 |
|
6. Ductility of the residue at 25 ° C, cm, not less than |
100 |
100 |
Ст на СИВ 4542-84 |
IV. DOCUMENTATION
Each batch of diluted bitumen is accompanied by an analysis certificate issued by the manufacturer containing the following information:
Each batch of diluted bitumen is accompanied by an analysis certificate issued by the manufacturer containing the following information:
- Name of the manufacturer;
- the name of the product;
- Laboratory testing results;
- quantity;
- date;
- Signature of Head chemical technology laboratory;
- FTS № 1 - 09- 04.
V. REQUIREMENTS FOR PROTECTION OF LABOUR AND SAFETY
Considering the use of thinner, representing a fraction of the distillation of petroleum, a certain composition, production and use of diluted bitumen must comply with all instructions and regulations on labor safety and fire safety.
VI. MANUFACTURER'S WARRANTY
The manufacturer ensures that the quality of diluted bitumen with the requirements of the Technical Specification only in compliance with the conditions of operation, storage and transportation specified in this specification.
Considering the use of thinner, representing a fraction of the distillation of petroleum, a certain composition, production and use of diluted bitumen must comply with all instructions and regulations on labor safety and fire safety.
VI. MANUFACTURER'S WARRANTY
The manufacturer ensures that the quality of diluted bitumen with the requirements of the Technical Specification only in compliance with the conditions of operation, storage and transportation specified in this specification.