POLITEX - AKV
- Polyethylene film
- APP / atactic polypropylene / - modified bitumen
- Reinforced base layer / non-woven polyester fabric/
- Colored mineral slate / shale / or polyethylene film
Application: Waterproofing of flat roofs, pitched roofs, the second top coat for repair of old roofs, first underlay for new roofs, a second top coat for new roofs over thermal insulation.
Benefits:
L
ightweight and flexible, strong and reliable, versatile, with a good aesthetic appearance, a variety of colors and shapes, saving labor and time, require no maintenance, durable.
R
oll waterproofing materials have a wide range of applications. As one layer coating - repair of old roofs, building foundations, basement walls, canals, new roofs, gas tanks for LPG, power substation KTP and others. Complete multilayer systems - for all kinds and types of roofs and engineering facilities / underground tanks, bridges, tunnels, roads, etc. /
T
he choice of the optimal variant of the waterproofing depends on several factors / as technological requirements, mechanical loads, weather conditions, etc. /, And therefore need to be made by a specialist - individually for each case.
IMPORTANT : Waterproofing rolls to be transported and stored vertically. Concrete basis on which to make, be smooth and pre-primed, clean and dry. Do not apply at ambient temperatures below -10 ° C
|
Parameters |
Test Method |
Measure |
POLITEX - AKB |
|||||||||||
|
2,5 kg/m2 without protective surface of slate chips |
3 kg/m2 without protective surface of slate chips |
3,5 kg/m2 without protection mineral powder |
4 kg/m2 without protective surface of slate chips |
4.5 kg/m2 without protective surface of slate chips |
5 kg/m2 without protective surface of slate chips |
5.5 kg/m2 without protective surface of slate chips |
3,5 kg/m2 with protective surface of slate chips |
4 kg/m2 with protective surface of slate chips |
4,5 kg/m2 with protective surface of slate chips |
5 kg/m2 with protective surface of slate chips |
5,5 kg/m2 with protective surface of slate chips |
|||
|
Type the basis |
- |
- |
Non-woven polyester fabric |
|||||||||||
|
Type of bitumen |
- |
- |
Modified: APP |
|||||||||||
|
Width |
BDS ЕN 1848-1 |
cм |
100 |
100 |
100 |
100 |
100 |
100 |
100 |
100 |
100 |
100 |
100 |
100 |
|
Mass per unit of area |
BDS ЕN 1849-1 |
kg/m2 |
2,5 |
3 |
3,5 |
4 |
4.5 |
5 |
5.5 |
3,5 |
4 |
4.5 |
5 |
5.5 |
|
Tensile strength at break – longitudinal – cross |
BDS ЕN 12311-1 |
N/5cm |
795 515 |
1011 535 |
780 540 |
795 510 |
825 560 |
860 575 |
825 650 |
930 575 |
870 570 |
890 593 |
860 630 |
830 650 > |
|
Elongation – longitudinal – cross |
BDS ЕN 12311-1 |
% |
36 37 |
41 49 |
42 54 |
44 56 |
44 49 |
43 46 |
41 41 |
35 46 |
35 35 |
35 38 |
40 41 |
40 41 |
|
Waterproof under pressure of 0.7 MPa for 24 h |
BDS ЕN 1928 Method В |
- |
impervious to water |
impervious to water |
impervious to water |
impervious to water |
impervious to water |
impervious to water |
impervious to water |
impervious to water |
impervious to water |
impervious to water |
impervious to water |
impervious to water |
|
Flexibility at low temperatures |
BDS EN 1109 |
°C |
0 °C / minus 5 °C without changes |
|||||||||||
|
Heat resistance |
BDS EN 1110 |
°C |
+ 120 °C without drip |
|||||||||||
|
Resistance of ripping off the joints – longitudinal – cross |
BDS EN 12316-1 |
N/5cm |
102 67 |
144 76 |
105 70 |
105 70 |
139 84 |
145 87 |
150 90 |
135 85 |
125 82 |
148 90 |
150 87 |
150 90 |
|
Shear strength of splice – longitudinal – cross |
BDS EN 12317-1 |
N/5cm |
(break outside joints) 796 520 |
(break outside joints) 1015 540 |
(break outside joints) 800 550 |
(break outside joints) 800 550 |
(break outside joints) 830 560 |
(break outside joints) 850 570 |
(break outside joints) 820 640 |
(break outside joints) 930 580 |
(break outside joints) 870 570 |
(break outside joints) 890 605 |
(break outside joints) 855 630 |
(break outside joints) 825 645 |
|
Dimensional stability |
BDS EN 1107-1 Method В |
% |
- |
- |
- |
- 0,8 ± 0,02 |
0,8 ± 0,02 |
0,8 ± 0,02 |
0,8 ± 0,02 |
- |
- |
- |
0,8 ± 0,02 |
0,8 ± 0,02 |
|
Resistance static load |
BDS EN 12730 |
- |
- |
- |
- |
in 250 N without leakage |
in 250 N without leakage |
in 250 N without leakage |
in 250 N without leakage |
- |
- |
- |
in 250 N without leakage |
in 250 N without leakage |
|
Resistance tear |
BDS EN 12310-1 |
N |
- |
- |
- |
200 ± 5 |
200 ± 5 |
200 ± 5 |
200 ± 5 |
- |
- |
- |
200 ± 5 |
200 ± 5 |
|
Adhesion of minutes. pospka (weight loss) |
BDS EN 12039 |
% by weight |
- |
- |
- |
- |
- |
- |
- |
4,4 ± 0,1 |
5,1 ± 0,1 |
4,7 ± 0,1 |
4,7 ± 0,1 |
4,9 ± 0,1 |