Bitumen dope cold seamless waterproofing of structural elements of buildings from ground water and moisture, suitable for regeneration and protection of old bitumen membranes.


SALAMBO® BITUMEN COATED HYDROINSULATION is designed for cold waterproofing, protection and maintenance of soil contacting elements of a building. After drying forms a tight, uniform and seamless coating which retains its properties at temperatures of -30 ° C to + 100 ° C. Can be used for internal and external protection of vertical and horizontal surfaces from underground moisture and groundwater.

Suitable for protection, maintenance and regeneration of old, worn and slightly brittle bitumen roofing membranes that will not or can not be replaced. It is also recommended to achieve a waterproof connection of corrugated bitumen panels and tiles.

SALAMBO® BITUMEN COATED HYDROINSULATION forming a watertight coating with high elasticity, which does not shrink and crack. It is resistant to aging, dilute acids, alkalis and any aggressive substances occurring in natural soil.
The product has good penetrating power, excellent adhesion and healing characteristics. Excellent adhesion to dry and slightly damp substrates to bitumen surfaces and to bricks, concrete, cement plasters and mortars, old bitumen coatings and paints. Easy to apply with a brush without the need for preheating. Does not require alignment or plastering Substrate.

For waterproofing foundations and foundations of buildings from moisture and groundwater forms a seamless vodonepronitsae th coating with high elasticity, which does not shrink and crack
protection, maintenance and regeneration of old, worn and slightly brittle bitumen membraneswaterproofing resistant to acids, alkalis and aggressive substances
withstand temperatures of -30 ° C to + 100 ° CApply easily without preheating

Fine dispersion of bitumen, filler and a solvent.

Packaging and material usage


Metal bucket of 18 liters.


1,1 – 1,3 L/m2 1-mm-thick coating
Shelf life and storage
Store and transport in tightly closed original container in a dry and cool (best on pallets). Can not be stored at temperatures below -10 ° C and +30 ° C above.

Do not leave it under the influence of direct sunlight and sources of UV rays!
Keep away from sources of heat!

The product is stable 24 months from date of production in unopened original packaging.

Substrate Preparation

SALAMBO® BITUMEN COATED HYDROINSULATION is used on all the bases that are strong, load-bearing and do not contain any separating substances (fats, dust, etc.). The surface must be clean, stable and free of cracks. It must first remove any unsound parts and layers with low mechanical resistance.

The substrate may be slightly damp, visible film of water. It should not be soaked with water or constantly wet because of the coating can not dry.

Existing cracks in the substrate must be pre-filled with SALAMBO® BITUMEN PASTE.


SALAMBO® BITUMEN COATED HYDROINSULATION is ready for use. Before opening the package shake well. It is not necessary dilution or heating of the product.
Mix well before use! Do not mix with other materials!

Way of working

SALAMBO® BITUMEN COATED HYDROINSULATION is applied by brush, roller or machine layer thickness 2-4 mm. Apply 2 or 3 layers, each layer is applied after complete drying and hardening of the previous one. Be careful not to hurt the previous!

In areas at risk of cracking in the second layer is embedded reinforcing mesh!

The drying time depends on the absorption capacity of the ground, the thickness of layers and environmental conditions. The surface must be completely dry before the subsequent construction activities upon it.

After work, the tools can be cleaned with organic solvents.


Waterproofing is done in dry weather at the base and the environment from +5 ºC to +30 ºC and humidity below 60%.
Time to complete drying of the product depends on the porosity of the substrate, the thickness of the waterproofing layer and the atmospheric conditions (temperature and humidity). For full security - should allow time for drying the product of 24 hours.
Keep away from running water and rainfall 24 hours after application!
Do not apply in cold and wet days, and in the rain!
Do not apply on frozen surfaces!
The vapors of the solvent ignite at 38ºC!
Keep away from open flames!
Do not apply the product under direct sunlight!
When working in confined spaces, they must be well ventilated! Wear protective gloves and goggles when applying!


Flammable liquids and vapors!
Harmful if inhaled!
May cause genetic defects if swallowed!
May cause cancer if swallowed!

Symbol of hazard:



Warning Phrases
Н 226Flammable liquid and vapor.
Н 304May be fatal if swallowed and enters airways.
Н 332Harmful by inhalation
Н 411Toxic to aquatic life with long lasting effects.
Р 102Keep out of reach of children.
Р 210Keep away from heat, sparks, open flames, hot surfaces. Smoking is prohibited.
Р 233Keep container tightly closed.
Р 273Avoid release to the environment.
Р 280Wear protective gloves and protective clothing.
Р 314If you feel unwell, seek medical advice / attention.
Р 403 + Р 235Store in a well-ventilated place. Keep cool.

The maximum VOC content of this product is 350 g / l!


Conforms to European and Bulgarian regulations and is in accordance with the standard:

European standardTest reports
BDS EN 13 808
Ordinance limiting emissions of volatile organic compounds in the use of organic solvents in certain paints, varnishes and vehicle refinishing products.
Technical data
IndicatorUnitTest MethodTest results
Exterior-ТСuniform viscous
Color -visualblack
Flash point in a closed container °СТС˂ 34
Dry matter content %ТС47-48
Penetration of the residue at 25 ° C -ТС28
Softening temperature°СТС55